RFX Sport Plastic Throttle Sleeve (White) - Honda CR125/250 FXTS1020000WT

.
Sport Series Throttle Tubes

RFX Sport Series Throttle Tubes are an exact replacement part at a fraction of the cost of genuine parts. They are made from a Teflon coated Nylon Fabric which provides you with a smooth action.
Replacement throttle tubes for all popular off-road bikes. Uses the same cam profile as the OEM part for proper throttle control. Teflon coated Nylon Fabric provides smooth action. Will not scar bars like aluminum tubes. Open end design for use with aluminum hand guards if required.


Fitting Instructions
Slide the rubber boot down and disassemble the throttle housing, remove the old throttle tube taking care not to damage the throttle cables. Carefully remove grip from the old throttle tube if required. Inspect the cables and housing for excess damage or wear, clean and lube them or replace if required. Clean the handlebar and inspect for damage where the old throttle tube has been spinning on the bar if a ridge is present replace the handlebars. Slide the new throttle tube on the handlebar and lube using a penetrating lubricant preferably Maxima MPPL (do not use grease as this attracts dirt and makes the throttle stick after a short period of time). Re-assemble the throttle cables and housing again using some penetrating lubricant. Tighten the throttle housing in the correct position on the handlebars. Adjust the cable to the required (free play amount) of your liking. Rotate the handlebars to their maximum position to check proper operation of the throttle and correct cable routing, some re-adjustment of the cable may be required. Slide the rubber boot back over the housing. Cover the hole in the end of the grip with some electrical tape (to stop glue entering the throttle barrel) and apply a small amount of RFX grip glue to the outer end of the throttle tube on the outside diameter. Apply a small amount of RFX grip glue to the inside of the new grip and slide onto the tube. Twist the grip to the correct position and leave to dry. Apply RFX safety grip wire if needed. After the glue has dried again check proper operation of the throttle. Color: White Material: PVC

It started like so many other fantastic ideas: with a passion and a garage. Late in 2020, Greg Moto AB grew up, initially as a hobby business. But it wasn't long before the dream switched up and we took the step out on the road for real.

Today we have a heart that bolts in Staffanstorp, more specifically on Maskinvägen 1. There you will find our Physical store of over 1000 m², Distributed on two levels - a paradise for all engine lovers! Here is crowded helmets, clothes, boots and shelter in all sizes, with extra pride in our wide ladies' range (yes, we dare actually say that it is Sweden's largest).

But it doesn't stay there ....

We have built up a web shop with over 100,000 products Where you can easily find the right spare parts and accessories - whether you drive high, moped or something in between. With our smart search function you can quickly pick up what suits your model. Smooth, huh?

We are developing with you - and for you

We believe that a good buying experience is about more than just clicking home the right parts. Therefore, we are constantly working to make our store (both online and physically) more inspiring, more personal and above all more fun to visit. We listen to our customers, test new ideas and improve every detail - all to make you feel as safe as tagged when you shop with us.

So whether you are a beginner on two wheels, veteran with leather vest or just the desire to upgrade the helmet - Welcome to Greg Moto. Here people meet with gasoline in the blood and a smile behind the visor.